- Suits QR-14E GasMax cook top
- Sale!
- Sale!
• Bowl size 400mmW×400D×300H; 90 mm Ø drain hole • 600 mm deep × 900 mm high • Specially designed for quick & simple assembly • Comes with instruction manual & tools • Supplied flat-packed for ease of transport • 4 legs per bench - 2100 & 2400 mm wide benches have 6 legs • 1.2 mm S/S • 15 mm wet edge • Centre bowl positioning • Bowls are fully welded, polished inside & out • 90 mm Ø drain hole - Sale!
Stand RGT-16-SESuits RGT-16E and RGT-16ELPG GasMax cook top1 Year Parts only Warranty - Sale!
Electric Conveyor Dishwasher Left Entrance - CCO-120ICW- All the main parts are manufactured in AISI-304 anti-corrosion stainless steel: tanks, washing and rinsing arms, rinsing jets, doors, basket conveyance system, boiler and metal tubes.
- Upwards-opening double panel door.
- Tank tray filters made of AISI-304 stainless steel, easy to access and remove for cleaning and access to the tank.
- Safety filter for pump suction.
- Rinsing boiler with heat insulation.
- Easy access for installation. Electrovalve located on one side (no need to remove panels to connect the machine).
- Electrical panel designed for easy connection of dosers for liquid and solid detergents, rinse aid, limit switches, supplementary emergency stop button.
- Washing arms easily removable as a set, for cleaning, with a plug on each branch providing access for cleaning inside.
- Rinse jets easily dismountable and removable.
- System of electronic regulation of speeds by means of frequency shifter.
- Configurable electronic temperature control: - Wash (50 - 65 °C) - Rinse (70 - 85 °C)
- Guarantor of rinse at 85 °C.
- Pressure regulator for flow control.
- Emergency stop button incorporated.
- Extra anti-entrapment protection system at the entrance, mounted on the AS-260 splash guard supplement (optional).
- Open door blocking system.
- IPX4 protection system.
- System for detection of blockage of conveyor carriage and automatic reverse function.
- High-power washing system with 4 upper and 4 lower washing branches.
- 3 washing programs: deep, medium and high capacity.
- Energy-saving system: reduces consumption by halting operation of the pumps, and by passing the heating of the rinse to stand-by mode (70 °C).
- Auto-timer which deactivates the conveyor motor after a pre-set period of inactivity (10 minutes).
- Energy saving system in the wash: the wash does not start up until it detects the passage of the basket.
- Rinse saving system. The rinse stops when the basket has left, saving water and energy.
- Model prepared for a cold water connection inlet (Inlet temperature < 50ºC)
- Sale!
1800mm Wide Free optional leg brace instead of solid shelf; please specify leg brace on purchase order if required OPTIONAL DRAWERS AVAILABLE; - See Stainless Steel Accessories • 600 mm deep × 900 mm high • Specially designed for quick & simple assembly • Comes with instruction manual & tools • Supplied flat-packed for ease of transport • 4 legs per bench - 2100 & 2400 mm wide benches have 6 legs • Locking drawers available* Legs • 1.2 mm S/S; 42 mm Ø • Fully adjustable S/S polished disc feet that match the legs perfectly • Castor kits available (lockable) Benchtops • 1.2 mm material; SUS304 (18/8) • Lined with XPS board, 20 mm thick & S/S panel • Special S/S ‘U’ channel reinforcements under - As the bench size increases so does the number of channels Undershelves • Height of shelf is fully adjustable, also an extra shelf can be added • Special ‘U’ channel reinforcements under to suit the bench type & size, and as the bench size increases so does the ‘U’ channel width; S/S 1.2 mm thick - Sale!
- Heated • 30 to 85 °C
- Advanced design
- Stainless Steel
- Three adjustable shelves
- Minimal footprint
- Easy to clean
- Double glazed front LED lighting in chilled model
- Self evaporating drainage Digital temp. control & read-out
- Sliding front and rear glass doors Danfoss compressor
- German EBM fan
- Sale!
- Natural Gas
- Stamped surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
- Laser-cut joints, automatic welding and polishing. Hidden screws.
- Rapid reaction and recovery times of the fry-top temperature.
- The fry tops are welded to the stamped surface top.
- Sale!
- Surface top manufactured in 1.5 mm thick AISI-304 stainless steel.
- Laser-cut joints, automatic welding and polishing. Hidden screws.
- Well built into the surface top with robotic welding and polishing.
- Cold area in the lower part of the well which helps to preserve the characteristics and quality of the oil used for longer.
- Thermostatic temperature control, between 60 and 200 °C.
- Safety thermostat in all models.
- Manufactured with a solid structure in AISI-304 stainless steel.
- Hidden screws.
- Can be quickly connected to serve as a support for surface top elements from the KORE 700 range.
- Can be used as an open storage element.
- Whole module unit.
- Designed to be attached to optional door kits.
- Made of stainless steel.
- Element for adding to the table-top appliances of Range 700 to obtain a compact unit.
- Manufactured with a solid structure in AISI-304 stainless steel.
- Hidden screws.
- Can be quickly connected to serve as a support for surface top elements from the KORE 700 range.
- Can be used as an open storage element.
- Module and a half unit.
- Designed to be attached to optional door kits.
- Top ventilation panel
- Merchant shelf
- Can fit in the middle of the chest freezer